Other processing techniques cylinder shape

In addition to the above described common pillars, Roman and twisted columns, there is a polygonal body pillars, its cross-sectional shape of a regular polygon. Polygonal body pillars into polygonal cross-section and other body pillars and tapered polygonal cross-section ranging from body pillars. Polygonal body pillars have column bases, column caps can be divided into a whole column or column splice several parts, whether or not spliced ​​Max size is determined according to the length of the column and processing equipment.

     Processing polygonal body pillars process than for processing the other pillars simple, circular saw, bridge cutting machine and other simple stone cutting device is equipped with a rotary cylinder, fixing accessories, can be processed polygonal cylinder body pillars. Process that saw reciprocating motion, with blocks car (circular saw) or saw power head itself moves back and forth (bridge cutting machine), you can complete the cutting edge between the cylindrical surfaces of the two planes; change saws the vertical height of the sheet position, you can adjust the processing of different diameter polygonal body pillars; aliquots rotating body blanks can be processed plane between the other two edges until the completion of the entire polygonal prism stone processing. When using the equipment for processing, should be noted that, as long as the pillars of the polygonal prism maximum circumcircle diameter and the largest sum allowance (blank maximum outer diameter) equal to the maximum distance between the blade and the work surface, polygonal body pillars The process can be achieved. Sometimes in order to get more working space, you can use a small diameter diamond saw, but need to pay attention to change the drive motor speed, so that the small diameter of the blade also work at a reasonable speed cutting line.

     Use with a lathe attachment versatility of CNC machining centers more easily processed polygonal body pillars, simply rotate the cutting direction of the diamond blade 90 degrees to make it consistent with the cylinder axis direction, according to pre-programmed machining program can be completed more automatic processing prism pillars. CNC machining centers on the use of a cylindrical end mill power head, can also be processed polygonal body pillars column bases, column caps, and is an integral pillar of processing.

     You can move back and forth in the beam, the blade can rotate 0-360 CNC lathe, it can also be easily processed polygonal body pillars. If this type of CNC lathe equipped with a cylindrical end mill power head, it can also be processed polygonal body pillars column bases, column caps, but with a plinth, overall stone column cap processing, preparation and processing program is very simple. After using fixed beams CNC lathe can be processed polygonal body pillars, pillars and even the whole, it must be equipped with three-dimensional laser scanner, making the body pillars polygonal model, by scanning of the model, and the preparation of a machining program, you can processing, and this configuration is currently rarely used.